|
LIQUID ROC: Secure your Safes the Modern Way
- No dispensing tools needed
- Pre-measured adhesives
- No messy mixing
- Will cure below freezing
- Pourable consistency
Installation:
- Drill hole to correct size and depth using rotary hammer.
- Remove dust and rubble from hole with compressed air, a brush and water. Excess water must be removed although hole may be damp. Hold each end of the pouch and pull firmly to remove dividers. Mix thoroughly in pouch until color is uniform. Do not use excessive pressure or puncture pouch while mixing.
- Cut corner and fill hole 2/3 full.
- Insert stud turning slowly by hand.
- Leave it undisturbed through prescribed curing time consistent with the on-site temperature.
Cure Time:
Concrete Temperature Time
Over 80 ° F 10 - 15 min.
80 ° to 68 ° F 15 - 20 min.
68 ° to 58 ° F 20 - 30 min.
58 ° to 48 ° F 30 - 60 min.
48 ° to 38 ° F 2 hrs
38 ° to 28 ° F 4 hrs
28 ° to 18 ° F 6 hrs
Below 18 ° F 24 hrs
Contact World Wide Safe Brokers
today for more information!
|
